YiFan Machinery - Sand Plant
Sand plant,Sand Maker product line,sand plants,Sand Maker plant,Sand Maker Manufacturer,vibrating screen, sand washer combination.

Sand Plant > News

> Sand plant equipment work best state debugging

Sand plant equipment work best state debugging

After we have known the working mechanism of the Sand plant equipment, we can focus on the optimization of the workflow. The engineers of YIFAN believe that  the following five aspects should be noted.

check the Sand plant equipment observation door of the eddy chamber is closed to prevented the material from bursting out of the eddy chamber.check the Sand plant equipment rotating direction of the impeller from the direction of the feed inlet. The impeller should rotate counterclockwise, otherwise you should adjust the Sand plant equipment wiring of the motor. the startup sequence of the Sand plant equipment and conveying equipment should be as followings: discharging → Sand plant equipment → feeding. The Sand plant equipment must be started without load. Feed after the Sand plant equipment is in normal operation. The stop sequence is contrary to the boot sequence.the feed particles strictly follow the regulations. The materials which is greater than the specification should be forbidden into the Sand plant equipment, otherwise, it would cause imbalance of the impeller or too much wear and tear of the impeller.  The impeller channel and the central feed tube even may be blocked ,which will make the Sand plant equipment not work properly. Immediately remove the large feeding material when you find it.

If the discharge device stops Sand plant equipment moving, it is timely to stop Sand plant equipment feeding. Otherwise, the Sand plant equipment impeller will be crushed and the Sand plant equipment motor will be burned up. In order to ensure the normal operation of the Sand plant equipment and give full play to the capacity of the Sand plant equipment, the majority of Sand plant equipment users should ideologically emphasis on the correct operation of the Sand plant equipment with regular maintenance and periodic maintenance. Properly using the Sand plant equipment is an important factor to ensure the continuous normal work of the Sand plant equipment. Improper operation or negligence in the operation will often cause the accident of the equipment and personal accident. Therefore, correct operation should be strictly in accordance with the provisions of the operating procedures.


Thank you for your interest in YiFan. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail:yifanseo@yfmac.com
MSN On line: yifancrusher@yahoo.cn
ICQ: 639607958 QQ: 2502761202
Tel: +86-371-64628852 Fax: +86-371-64628872
The article by Sand Maker product line,sand plants,Sand Maker plant Yifan Machinery Editor:
http://www.sandplant.net/ , please indicate the source , little effort , thank you.
 
 

 

© 2010 YiFan Machinery