Sand Plant

The working features of sand plant

The impeller is an important part of the sand plant equipment and it is also the most vulnerable part of the  sand plant equipment. Since the materials complete the distributed emission in the impeller, it is likely that the materials wear impeller with improper operation. Therefore, we should pay extra attention in the working process to prevent carelessness from triggering a series of accidents in production process. We know that the sand plant equipment impeller is installed on the top head of the axis of the spindle assembly. The sand plant equipment impeller uses the joint of the cone sleeve and the key to deliver the torque for high-speed rotation. The materials enter the center of the sand plant equipment impeller through the center of material distributor of the upper impeller. The fabric cone body at the center of the impeller uniformly distributes the material to all the sand plant equipment launch runner. The wear block made of special material is installed at the exit of the sand plant equipment launch runner, which can be replaced. The impeller accelerates the materials to a certain speed to projectile them out. The materials impact of materials lining in the eddy crushing cavity for strong self-smash. The upper and lower runner plates are equipped with between the cone hat and the wear block of the sand plant equipment impeller to prevent it from wearing and tearing. Before the device stops running, you should note that first stop sand plant equipment feeding before stopping the discharge device. The feeding should be continuous and uniform. The material specifications should strictly comply with the requirements. Otherwise, it is easy wear the impeller because of materials.Under normal circumstances, the transmission of the sand plant equipment mostly uses a single motor or double motor-driven belt drive mechanism. Two electric motors of the dual-motor drive are installed on both sides of the spindle assembly. The pulleys of two motors are connected by the belt and the spindle pulley to ensure that both sides of the spindle are stressed balanceable without additional torque.

Thank you for your interest in YiFan. Please use any of the methods below to get in touch with us.
Add: The Middle of Zhengyuan Road, Xingyang Eastern Development Zone.
zip:450100
E-mail：yifanseo@yfmac.com
MSN On line: yifancrusher@yahoo.cn
ICQ: 639607958 QQ: 2502761202
Tel: +86-371-64628852 Fax: +86-371-64628872
The article by Sand Maker product line,sand plants,Sand Maker plant Yifan Machinery Editor:
http://www.sandplant.net/ , please indicate the source , little effort , thank you.